Silicone Spray Lubricant 7.5 oz CRC 05074 Water‑Resistant High‑Temp

Description

Product Overview

CRC Silicone Spray Lubricant is engineered to provide a high‑performance, water‑resistant silicone film that protects moving parts from friction, wear, and corrosion. Packaged in a compact 7.5 oz aerosol can, the product combines a durable plastic container with a machined exterior for easy handling and precise dispensing. The formulation is based on premium silicone polymer that remains flexible across a wide temperature range, from sub‑freezing conditions up to 400 °F (204 °C). This broad temperature tolerance makes the spray suitable for both indoor and outdoor environments, where exposure to heat, moisture, or dust is common. The spray delivers a fine mist that quickly spreads across surfaces, forming a thin, invisible barrier that reduces squeaking, binding, and metal‑to‑metal contact. With a lightweight design weighing only 8 ounces, the can is portable enough for on‑site service technicians, hobbyists, and DIY enthusiasts alike.

Usage

The silicone spray excels in a variety of real‑world scenarios. It is ideal for lubricating hinges, door locks, and sliding mechanisms in residential and commercial settings. In automotive applications, it protects rubber seals, plastic clips, and metal fasteners during assembly, maintenance, and repair. Outdoor enthusiasts appreciate its ability to repel water on camping gear, bicycle chains, and fishing equipment, ensuring smooth operation even after exposure to rain or humidity. The product is also safe for use on electrical connectors and plastic components, as the silicone film does not conduct electricity and does not degrade most polymers. For best results, apply a light, even coat to clean, dry surfaces and allow the spray to dry for a few minutes before re‑engaging the moving parts.

Why Choose Us

Choosing CRC means selecting a brand with decades of experience in lubrication technology. Our silicone spray is formulated in a state‑of‑the‑art facility that adheres to strict quality‑control standards, ensuring each can delivers consistent performance batch after batch. The product is backed by a robust warranty and supported by a dedicated customer‑service team that can answer technical questions, provide usage tips, and assist with any concerns. CRC’s commitment to sustainability is reflected in the recyclable packaging and the low‑VOC formulation, which meets environmental regulations without compromising effectiveness. When you purchase this spray, you receive not only a high‑quality lubricant but also the peace of mind that comes from a trusted industry leader.

Performance and Temperature Resistance

The silicone base of CRC’s spray maintains its lubricating properties across an extensive temperature spectrum. At low temperatures, the fluid remains fluid enough to penetrate tight gaps, preventing brittleness that can lead to cracking. At high temperatures, up to 400 °F, the silicone film retains its elasticity, resisting hardening or breakdown that many petroleum‑based lubricants experience. This thermal stability is crucial for components that experience rapid heating cycles, such as engine bay fasteners, exhaust system brackets, and high‑speed bearings. The film also provides a protective barrier against oxidation, extending the service life of parts that are regularly exposed to harsh conditions.

Material Compatibility

CRC Silicone Spray is safe for use on a broad range of materials, including nylon, rubber, polyurethane, ABS plastic, aluminum, steel, and painted surfaces. The formulation does not contain solvents that could dissolve or discolor delicate polymers, making it suitable for delicate mechanisms like camera lenses, musical instrument hinges, and precision gear assemblies. For metal components, the silicone film reduces metal‑to‑metal contact, minimizing wear and the need for frequent re‑application. The product’s non‑conductive nature also means it can be applied to electrical contacts without risking short circuits, a valuable attribute for electronic housings and connector maintenance.

Water Resistance and Outdoor Durability

One of the standout features of this spray is its ability to repel water. Once the silicone film cures, it creates a hydrophobic surface that prevents moisture from adhering to the treated area. This property is especially beneficial for outdoor equipment, such as garden tools, patio furniture hinges, and marine hardware, where water exposure can accelerate corrosion. The spray also resists UV degradation, ensuring that the protective layer does not become brittle or chalky after prolonged sunlight exposure. Users can rely on the product to maintain performance in rainy, humid, or salty environments.

Application Method and Coverage

The aerosol delivery system provides a fine, even mist that reaches into hard‑to‑access crevices and tight joints. A short, controlled spray is sufficient to coat a surface with a thin, uniform layer. Over‑application is discouraged, as excess film can attract dust or create a gummy residue. After spraying, the film dries to a clear, non‑sticky finish within minutes, allowing immediate operation of the lubricated component. The quick‑dry characteristic reduces downtime in professional settings where efficiency is paramount.

Packaging and Convenience

The 7.5 oz can is designed for ergonomic handling, featuring a trigger‑type actuator that reduces hand fatigue during extended use. The can’s compact dimensions (2.63 × 2.63 × 6.25 in) fit comfortably in toolboxes, glove compartments, and workshop shelves. The label includes clear usage instructions, safety warnings, and a barcode for easy inventory management. The product is shipped in a recyclable cardboard box, aligning with eco‑friendly packaging standards.

Safety and Environmental Considerations

CRC Silicone Spray is formulated with low volatile organic compounds (VOCs) and complies with major safety regulations. The spray should be applied in a well‑ventilated area, and users are advised to wear protective eyewear to prevent accidental contact with the eyes. The product is non‑flammable when applied as directed, but the aerosol canister is pressurized and should be stored away from open flames. In case of skin contact, the affected area should be washed with soap and water. The silicone base is inert and does not pose significant environmental hazards when disposed of according to local regulations.

Customer Support and Warranty

CRC stands behind its products with a comprehensive warranty that covers manufacturing defects for a specified period. Customers can reach the support team via phone, email, or live chat for assistance with product selection, application techniques, or troubleshooting. The company also provides an online knowledge base with detailed technical sheets, safety data sheets, and instructional videos. This level of support ensures that users can maximize the benefits of the silicone spray throughout its lifespan.

Durability and Longevity

When applied correctly, the silicone film can last for months, depending on the intensity of use and environmental exposure. The film’s resistance to abrasion and chemical attack means that it does not need frequent re‑application in low‑stress applications, reducing maintenance costs. For high‑stress or high‑temperature environments, periodic re‑application ensures continuous protection and optimal performance. The long‑lasting nature of the coating makes it a cost‑effective solution for both professional mechanics and home DIY projects.

Industry Applications

Beyond automotive assembly, the spray is widely used in aerospace, marine, manufacturing, and consumer electronics. In aerospace, it lubricates landing‑gear pivots and cabin door mechanisms. Marine technicians apply it to boat deck fittings and propeller shafts to prevent corrosion from saltwater. Manufacturing plants use it on conveyor belts, pneumatic cylinders, and robotic arms to maintain smooth operation. In consumer electronics, it protects keyboard hinges and headphone swivel joints, extending product life. The versatility of CRC Silicone Spray makes it a go‑to lubricant across multiple sectors.

Key Features

• Provides a clean, water‑resistant silicone film that eliminates squeaks and binding
• Works on nylon, rubber, metal, and most plastics for versatile application
• Resists temperatures up to 400 °F, suitable for high‑heat environments
• Easy‑to‑use aerosol spray delivers even coverage and quick drying
• Backed by CRC customer support and warranty for peace of mind

FAQ

Can I use this spray on painted surfaces?

Yes, the silicone formulation is non‑solvent based, so it will not damage or discolor most paints. Apply a light coat and test on a small hidden area if you have concerns.

Is the spray safe for electrical contacts?

The silicone film is non‑conductive, making it safe for use on low‑voltage electrical connectors and switches. Avoid applying excessive amounts that could trap dust.

How often should I reapply the lubricant?

Reapplication frequency depends on usage intensity. For occasional household tasks, a single application may last several months. In high‑stress or high‑temperature applications, reapply every few weeks to maintain optimal performance.

What safety precautions should I take when spraying?

Use the product in a well‑ventilated area, wear protective eyewear, and keep the can away from open flames. Do not inhale the spray directly; hold the can upright and spray in short bursts.

Is the packaging recyclable?

Yes, the aerosol can is made of recyclable steel, and the outer cardboard box is also recyclable. Follow local recycling guidelines for proper disposal.